ThermoPlate^®Ⅲ

UpCell^®/RepCell^®dedicated glass heater

Key features

• • A heating element made by a transparent glass plate.
  • Maintain the temperature of the UpCell at 37°C outside the incubator
  • Ideal for temperature control during microscopic observation and medium exchange
  • It is the size that one multi-well plate can be placed
  • Using a sterilization-compatible temperature sensor, it is possible to measure the actual temperature of the medium and correct the plate surface temperature.
  • The sample temperature measured by the sensor can be displayed and recorded. Data can be output in CSV format.
  • Adopted continuous output control method from conventional ON-OFF control
  • Compatible with standard XY mechanical stages

• 

• Features of Thermo Plate III for UpCell^® / RepCell^®
• • A transparent heating element made by specially processing hard glass.
  • Improves work efficiency in a clean bench such as microscopic observation using UpCell^® / RepCell^® and medium exchange.
  • The temperature can be set from room temperature to 50 ° C.
  • Lightweight (Heating Plate: about 70g) and suitable for carrying
  • It can also be used to prevent anti-fog during shooting by covering it over a culture dish or multi-well plate.

• Culture dish temperature distribution comparison

• • 

  • ※In the photo, the temperature around the dish is displayed high, but this is due to the reflection of the dish and does not affect the actual temperature inside the dish.

• For anti-fog of the lid when observing / shooting

• It becomes cloudy more and more under normal observation conditions.

  On the lid by placing Thermo Plate III for exclusive use of UpCell® / RepCell® , it does not become cloudy and visibility is good.

Specification